Ensure that all of your Gas Appliances are Working Properly
Don’t take any chances – safeguard your family today!
When natural gas or liquid petroleum gas (LPG) does not burn properly, carbon monoxide (CO), a very toxic gas, is released into the air. A gas appliance that has been poorly installed, repaired, or maintained might result in a gas leak, which is why it is so critical to get your gas safety inspection by a Gas Safe licensed engineer once a year.
Is there a Danger to Use a Gas Appliance that isn’t Safe?
Having an insecure gas appliance in your house poses three primary dangers:
- Gas leaks can cause explosions and flames. Carry out a gas safety inspection to ensure your safety. Contact 911 as soon as you suspect the presence of gas. A Gas Safe trained engineer will do a gas safety inspection, visual examination and a tightness test on the pipes to verify that there are no gas leaks there.
- Faulty equipment or pipes can leak gas, which can be ignited and set off an explosion, resulting in fires and explosions.
- Symptoms of carbon monoxide poisoning include nausea, vomiting, dizziness, and a loss of consciousness.
Your gas pipes should also be examined during the yearly gas safety inspection. As a landlord, you are also required by law to repair the gas safety equipment in your home. Many providers can carry out a gas safety inspection reminder service.
What does a Gas Safety Inspection Entail?
Only a gas licensed engineer should conduct a gas safety check on your home’s appliances to ensure that they are safe to use.
By doing a safety check on a gas appliance, you can be confident that it:
- It is appropriately set and adjusted to ensure that the gas burns as intended.
- Does what it’s supposed to do.
In addition, your engineer will see to it that:
- There is a sufficient and reliable air supply for the device that has been installed.
- All safety devices have been tested and are working properly in all cases.
- Alternatively, the engineer can do an extensive safety assessment of the entire gas installation, including the following tasks:
- Visually check the pipes to make sure it’s in good working order before moving on.
- If you live in a property with a common flue or chimney, make sure you share the duty of having them checked out annually. CO may enter buildings through shared vents.
Recognize the Warning Signals.
You should be on the lookout for these indicators by carrying out a gas safety inspection.
Your gas appliance should be repaired immediately if you see any of the following:
- There is an issue with your appliance.
- Instead of a clean blue flame, it creates a droopy yellow one.
- There are dark markings on or around the appliance that is either black or dark brown.
- Keeps going out on the boiler’s pilot light
- Condensation in the windows has risen.
Check your gas appliance manufacturer instructions to see how often a gas safety inspection is advised; don’t wait for these indicators to show before scheduling a service.
Unless your gas Safe trained engineer indicates otherwise, we recommend yearly servicing if you don’t have access to these. If you see any warning signals that indicate a dangerous appliance, you’ll require an appliance service from a Gas Safe trained engineer at the very least. A yearly gas safety check will ensure that your gas appliances operate properly.
What’s Involved in an Appliance Repair?
As part of a standard gas safety check, an appliance service comprises all typical processes. However, your engineer will do a more extensive gas appliance inspection with extra tests described in the manufacturer’s instructions.
Some examples are as follows:
- To guarantee that the device is safely burning gas, an examination of the exhaust gases
- Cleaning the heat exchanger, inspecting the seals and gaskets, and looking for any symptoms of heat or discomfort.
- Depending on the kind and brand of the appliance, your Gas Safe trained engineer may need to perform extra or alternative examinations. A boiler gas safety check or service may differ from a gas stove service.
You may be granted a Gas Safety Record based on the job they’ve done. It’s a good idea to verify with the registered business engineer’s firm before they come out to see you, even though it’s not required by law. If you’re interested in learning more, check out our page on Gas Safety Records.
As part of the Gas Industry Unsafe Situations Procedure, all Gas Safe qualified engineers must follow when inspecting potentially unsafe gas equipment (GIUSP).
How Much Does it Cost to Have a Gas Safety Inspection or Servicing Performed?
The price of your gas safety check or service will be determined by the Gas Safe qualified engineer you pick; however, if you are on means-tested benefits, you may be eligible for a free gas appliance inspection.
Contact your energy provider to learn if you’re qualified for free gas safety checks.
What are the Fines for Breaking Gas Safety Regulations?
Your renters’ lives might be in danger if you don’t have your gas appliances and piping inspected yearly. Because of this, the penalty for noncompliance with gas safety standards is high.
Fines or jail time up to six months are the usual consequences. Manslaughter charges may be filed against you if you’re determined to be the cause of the death of a renter.
Additionally: The validity of your insurance policy may be called into question.
Unable to offer a renter a copy of the most recent gas safety certificate may prevent you from serving them with Section 21 notices.
How to Ensure that you are Adhering to Gas Safety Rules
Even though the fines are hefty, the gas safety standards are rather simple. As a result, we’ve compiled the following list:
There are six actions you may take to avoid getting into trouble with the law:
- Once a year, have a gas safety inspection performed.
- Repair and maintain your gas safety record as directed by your engineer.
- You should make sure your renters are given a copy of the recording paper when the inspection is complete
- Please maintain the original Gas Safety Record for at least two years after the date of your last use.
- Following the manufacturer’s recommendations, or once a year, service all gas appliances
- Ensure that any contract with a management agency clearly says who is accountable and liable for ensuring that your gas safety duties are fulfilled.
Hire a Professional Today!
If you don’t know where to look for a qualified Gas Engineer for your annual Gas Safety Inspection, simply visit MyConstructor. We have gathered for you the best professionals in their field for any kind of property services. You can easily compare prices and reviews and choose the professional that suits your needs.
