Most people are confused about whether setting up a security camera on the window or glass side is possible. If possible, indoor security cameras will contact less dirt and be easier to maintain and clean.
Also, the user does not have to worry about any extreme weather with their security cameras. Although it sounds easy, the process is not that simple. Setting up a camera without considering some important factors can only lead to a disappointing result.
You can use indoor security cameras on windows or glass, but there are some limitations. These limitations will be easily overcome by following some essential factors. Regarding this, we will let you know the different key information about installing security cameras behind windows or glass.
Potential Problems If Security Cameras Are Set-Up Behind Windows Or Glass
Installing security cameras next to the glass or windows will absolutely lower the desired video quality. This is because there will be an additional layer between the target and the camera lens. This loss would be acceptable if not for the flare effect, which totally ruins the video footage. Usually, window glare comes from different sources due to light visibility.
Besides, a security camera itself makes reflections on the glass for the infrared LED light. This effect creates a solar hot spot that covers half of the screen in bright light. As a result, the focusing area of the security camera will be obscured. However, a glass flare isn’t the only problem you will have to face. Windows panels also endangered the camera’s motion-sensing capability.
Old-model security cameras with infrared sensors cannot work properly for this difficulty. In that case, installing the best 24/7 security camera will help the camera record video through windows or glass for a longer time. This camera uses advanced software to measure changes in the footage that work fine from behind glass.
Do Security Cameras Work Through Windows Or Glass?
If a security camera is set up behind windows or glass, it will be prone to whitewash footage, especially in low light conditions. But this problem can be overcome using some effective tips:
Install Camera Close To The Glass
Installing the security camera as close as possible to the glass helps to reduce window reflection and glare. Here, you will have to mount the camera properly by using glue or tape. You can also use a suction cup mount that features a magnetic screw to mount the camera.
Switch Off IR Light
Turn off the IR light on your security camera to reduce the window reflection. You can also disconnect the IR sensor manually from the main board or alter the configurations. This will help the camera to record through the window panel clearly.
Turn Off Status Light
Most security cameras contain different status lights like the camera being a strong signal, online, offline, other blinking lights, etc. These lights make reflections on the window, which causes vague video recording. So, you will need to access the camera settings and disable all status lights that your security camera has.
Install Exterior Light
You will have to ensure the place where your camera is mounted is darker than the exterior environment. When your targeted area is lighted properly, the camera can record precise videos. Using motion-activated LED spotlights will be a good way to brighten your exterior environment.
Use Infrared Illuminator
If you are unable to set up motion-activated lights, the infrared illuminator will be worth considering. It is a small device that helps to fill your entire exterior with infrared light. As naked eyes can’t see this light, the environment will remain dark. But it will work as daylight to the camera.
Clean Your Windows
You will need to ensure the window is free of any debris and dust on both the exterior and interior of the glass. A smudgy window glass will result in blurry footage. Besides, dust and dirt will cause the camera to focus incorrectly. This will lead to recording unfocused video footage. So, you should clean the window glasses to ensure clear footage.
Is Motion Detection Effective Through Windows Or Glass?
Typically, the motion detection feature of the security camera is performed through software or a physical motion detector. Software-based motion detection determines movement by measuring pixel changes. It detects the changes in the pixels and determines that there was movement.
On the other hand, physical motion detection is known as a PIR sensor that detects movement by measuring infrared energy and body heat. Security cameras with PIR sensors are not suitable to place behind windows or glass. As the camera doesn’t get clear visuals through windows or glass, this type of sensor doesn’t work well.
This is because modern glasses are insulated, which doesn’t allow measuring heat coming through the glass. In that case, software-based motion detection will work effectively to detect movement behind windows.
Advantages Of Installing Security Cameras Behind Windows Or Glass
Security cameras are the most helpful device to protect, whether it is your personal belongings or an entire house. But setting the camera on the outside will not be enough sometimes. In that case, installing cameras inside the house will be a good option. Below we have pointed out some significant benefits of setting cameras behind windows or glass.
- Installing a security camera indoors is quite easy compared to outdoors. You will easily access all the necessary electric connections or circuits.
- With this technique, you will not have to be concerned about weather conditions. No matter how sunny or stormy the day may be, your security camera will keep functional.
- Your indoor security camera will need to be free from any kind of dust and debris. For that, you will get precise video footage. This also helps the camera to focus on anything easily.
- If you are worried about a thief, installing an internal security camera would be a good choice. Instead of letting the thief know about the camera, it records all the activities outside.
Conclusion
You might have understood whether setting up security cameras will work through windows or glasses. Numerous things will need to consider placing security cameras behind windows or glass. Although this method has some limitations, that doesn’t mean your camera will not work through windows or glass.
However, in this context, we have provided enough information about what you will need to make your security camera workable through windows and glass. Your security camera will work even behind windows or glass, applying some simple techniques discussed above.
