Life can be pretty unbearable if the air conditioner in a home or a building is not functioning. Repair and replacement can also be expensive and that is why you need to ensure you’re getting everything right from the onset. Since repairs are expensive, you need to make sure you’re getting the correct size and HVAC technician. You’re supposed to look for a reputable air conditioning Maui technician who has the necessary experience to work with the majority of brands. Here are some of the problems that you’re likely to experience with your air conditioner.
Filter
One of the main reasons why air conditioners break is clogged or dirty filter. Most homeowners will wait until it is too late before they replace the filter. The manufacturer will have the specific guidelines that need to be followed when it comes to replacing and taking care of the filter.
There are some filters that will need to be changed every month while others can take up three months before they are completely replaced. One of the easiest ways to determine if the filter needs replacement is by looking at light that is passing through it. It will be time to do some cleaning or replacement if there is no light passing through. A dirty filter will not only interfere with the flow of air but can also cause the unit to freeze.
Leaking Duct
The ductwork going through your ceiling and walls is responsible for carrying cool air from the AC throughout the space in a home or a building. The mechanism can be interfered with if there are holes in the ductwork. You will most likely need a lot more energy for you to cool a room. The AC will most likely be the culprit if you notice an increase in electricity costs in your home.
Thermostat Problems
This is a problem that is likely to be experienced if you have an old dial-type thermostat. The problem could be incorrect calibration. The air conditioning system will not be getting the right instructions for proper temperature regulation. This problem can easily be fixed by recalibrating or replacing the thermostat. You might need an expert to help with the calibration. The other alternative would be to look for a programmable thermostat so that you don’t have to do the manual calibration every time. If you have to do it manually, make sure you’re checking the manufacturer’s instructions.
Clogged Drain
The problem could also be coming from a clogged drain. The moisture that is released by the HVAC system has to go somewhere. It is supposed to go through a drain line when it is leaving the space. There could be potential problems if the drain is clogged. It means that the moisture will not have anywhere to go which lead to damaging of the system. There could also be water leaks which can damage the walls, ceilings, and furnishing in the house. Mold can grow which can lead to expensive repairs if the problem is not taken care of in time.
Dirty Coils
The condenser coils play a crucial role in the HVAC system as it gets rid of the heat that is removed from the air. It’s functioning can be altered with if there are blockages or when it is covered by grim and dirt. This is common in cities because of the high levels of pollutants in the air. Dirty coils will mean the system has to work extra harder thus leading to faster wear and tear. Your HVAC system might not leave to its intended lifespan because of the constant repairs.
Problems With the Fan
There are two main fans in an air conditioner. One is responsible for cooling the air while the other is responsible for heating. There is a chance that either of the fans might not be working properly because of lack of lubrication, faulty motor, too much dirt, and debris. Faulty fans will result in poor air conditioning which will not be ideal for the comfort of a home or an office. The problem will likely lead to compression failure if it is neglected which will sometimes mean replacing your HVAC unit.
Another common problem is low refrigerant levels. There won’t be enough of it to cool the air. This could come about because of leaks in the system. You will need to call a qualified HVAC technician to get to the bottom of the problem before it gets out of hand.
